Anritsu S331C Uživatelská příručka Strana 67
- Strana / 82
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
System Operations 5-5 Self Test
Site Master User Guide PN: 10580-00252 Rev. A 5-7
5-5 Self Test
At power on, the Site Master runs through a series of quick checks to ensure that the system
is functioning properly. The System self test runs a series of tests that are related to the
instrument. The Application Self Test runs a series of tests that are related to the current
operating mode of the instrument.
If the Site Master is within the specified operating range with a charged battery, and the self
test fails, then contact your Anritsu Service Center (http://www.anritsu.com/Contact.asp).
To start a self test when the system is already powered up:
1. Press the Shift key and then the System (8) key.
2. Press the
Self Test submenu key. The Self Test results are displayed.
3. Press Esc to continue.
5-6 Updating Site Master Firmware
Please review the MST User Guide section on copying firmware to a USB memory device.
Update From USB Memory Device
1. Run Master Software Tools and load the firmware update onto the USB memory device.
Review the section (in MST Help) that discusses this process.
2. After the firmware is loaded, insert the USB memory device into the USB port of the
instrument.
3. Press the following key sequence: Shift > System (8) > System Options > Reset >
Update Firmware. The Load Firmware main menu key is displayed.
4. Press the Load Firmware main menu key to list the Firmware Update menu and
Update Application Firmware submenu key.
5. Press the Update Application Firmware submenu key and the Firmware Update dialog
opens.
6. Highlight each of the save choices: Save None, Save User Data, and Save & Restore User
Data. Read through each choice carefully and then select the desired save mode.
•Save None: No attempt will be made to save any user data.
• Save User Data: User data will be save to the selected external media device.
• Save & Restore: User data will be saved to the selected external media device.
The instrument will also attempt to restore the files to the instrument after the
update.
7. Press Enter to begin the firmware update process. To abort the process, press Esc then
choose another analyzer mode or power down.
Warning
If there is not enough available memory space for all user data, then some data
may be lost during this process.
Warning
If there is not enough available memory space for all user data, then some data
may be lost during this process.
- Site Master 1
- S331E, S361E, S332E, S362E 1
- CE Conformity Marking 5
- C-tick Conformity Marking 5
- Notes On Export Management 5
- Mercury Notification 5
- Symbols Used in Manuals 7
- For Safety 8
- Table of Contents 9
- Table of Contents (Continued) 10
- 1-1 Introduction 13
- 1-2 Chapter Overview 13
- 1-3 Available Models 13
- 1-4 Available Options 14
- 1-5 Standard Accessories 14
- 1-7 Additional Documents 15
- 1-8 General Description 15
- 1-6 Optional Accessories 15
- 1-10 Preventive Maintenance 16
- 1-11 Calibration Requirements 16
- 1-12 Annual Verification 16
- 1-13 ESD Caution 17
- 1-14 Battery Replacement 17
- 1-15 Soft Carrying Case 19
- 1-16 Tilt Bail Stand 20
- Site Master Memory Types 21
- 2-1 Introduction 23
- 2-2 Chapter Overview 23
- 2-4 Front Panel Overview 24
- Front Panel Keys 25
- Touch Screen Keys 27
- Keypad Menu Keys (1 to 9) 27
- 2-5 Display Overview 28
- 2-7 Symbols and Indicators 32
- Additional Symbols 33
- 2-8 Data Entry 34
- 2-9 Mode Selector Menu 35
- 3-1 Introduction 37
- Select the Measurement Type 38
- Set the Frequency 38
- Set the Amplitude 38
- Turn on Markers 39
- Single Limit Line 40
- DTF Setup 41
- SiteMaster 42
- 3-4 Spectrum Analyzer 43
- Set the Span 44
- Segmented Limit Lines 45
- Create a Limit Envelope 46
- Setting Up Markers 47
- Chapter 4 — File Management 49
- Save Dialog Box 50
- Quick Name Keys 50
- Recall Files 51
- Recall Dialog Box 51
- Copying Files 52
- Deleting Files 53
- Delete Dialog Box 53
- 4-3 File Menu Overview 54
- 4-4 File Menu 55
- Save Menu 56
- Save Location Menu 56
- Save On Event Menu 57
- Recall Menu 58
- Copy Menu 59
- Delete Menu 60
- 5-1 Introduction 61
- 5-2 System Menu Overview 62
- 5-3 System Menu 63
- System Options Menu 64
- Reset Menu 65
- 5-4 Preset Menu 66
- 5-5 Self Test 67
- Chapter 6 — GPS (Option 31) 69
- Recalling GPS Information 71
- 6-5 GPS Menu 72
- 7-1 Overview 73
- 8-1 Introduction 75
- 8-2 MST Overview 75
- 8-3 Feature Overview 75
- 8-4 Installing MST 76
- A-1 Introduction 77
Související produkty a manuály pro Měření, testování a kontrola Anritsu S331C
(16 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.026 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce