Anritsu S331C Uživatelská příručka stáhnout pdf (Strana 24)

2-4 Front Panel Overview Instrument Overview

2-2 PN: 10580-00252 Rev. A Site Master User Guide

To turn on the Site Master, press the green On/Off button on the front panel (Figure 2-1)

The Site Master takes approximately sixty seconds to complete power warm-up and to load

the application software. At the completion of this process, the instrument is ready for use.

2-4 Front Panel Overview

The Site Master menu-driven interface is easy to use and requires little training. The

Site Master uses a touch screen and keypad for data input. The five bottom menu keys and

eight submenu keys on the right side are touch screen keys. The menu and submenu keys will

vary depending upon the selected mode of operation, see “Mode Selector Menu” on page 2-13.

Numeric keys 1 through 9 are dual purpose, depending upon the current mode of operation.

The dual-purpose keys are labeled with a number on the key itself and the alternate function

is printed in blue above each of the keys. Use the blue Shift key to access the functions printed

on the panel. The Escape key, used for aborting data entry, is the oval button located above

numeric key 9. The rotary knob, the four arrow keys, and the keypad can be used to change

the value of an active parameter.

The Menu key provides graphical icons of all the installed measurement modes and user

defined short-cuts (see “Menu Key” on page 2-3). The locations of the keys are shown in

Figure 2-1.

Figure 2-1. Site Master Overview

Note

Keep the fan inlet and exhaust ports clear of obstructions at all times for proper

ventilation and cooling of the instrument.

Touch Screen

Main Menu Keys

On/Off Button

Shift Key

Numeric Keypad/

Shift Menu Keys (1 to 9)

Printed in Blue

Touch Screen

Submenu Keys

Fan Inlet Port

Fan Exhaust

Port

Calibration

Status and Type

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 81 82

Žádné komentáře

Anritsu S331C Uživatelská příručka Strana 24