Anritsu S113C Uživatelská příručka Strana 96

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 120
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 95
Step 9. Press the EDIT soft key. Use the Up/down arrow key to move the marker over
one of the spurs. Press the ENTER key to set the marker.
Step 10. Compare the value of the marker to the specified allowable level of out-of-band
spurious emissions for the corresponding channel transmit frequency.
Step 11. Repeat Steps 8-11 for the remaining spurs. Use either Marker 1 again, or choose
another marker.
Figure 5-16 shows a simulated out-of-band spurious signal at 21.052 MHz from the carrier.
5-24
Chapter 5 Spectrum Analyzer Measurements
Figure 5-16. Simulated Out-of-Band Spurious Emission Measurement
SgLabs
www.sglabs.it
tel. +39 0755149360
SgLabs
www.sglabs.it
tel. +39 0755149360
Zobrazit stránku 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 119 120

Komentáře k této Příručce

Žádné komentáře